Vazar AerospaceTurbine Otter
Dehavilland Turbo Otter DHC-3 STC
Vazar Dash 3 Conversion Kit Components:
The VAZAR Conversion Kit consists of all components necessary to install and operate the PT6A-135 series turbine engine on the DHC-3 Otter aircraft. The kit includes fuel system, propeller, oil cooler, inlet heater, starter/generator, battery source, electrical Interface, cabin heat system, engine cowlings, controls, and all other associated instruments and hardware.
SYSTEM CHANGES
|
|
|
Dehavilland Turbo Otter DHC-3 STC - Click To Enlarge
Nakina Air, Nakina Ontario
|
Fuel System Fuel transfers from forward and aft tanks to Interconnected center tanks by ejector pump. Two electric fuel Dumps installed.
Fuel tanks: remain unchanged.
Fuel types: Jet A, JetA-1, Jet B, JP5. (aviation gas may be used for 50 hours between overhauls.)
Heater: replaced with a Janitrol let fuel heating unit (Model 23E62).
Propeller: 3-blade Hartzell (HC-B3TN-3DY/T 10282) with pitch lock pins, full reversing capabilities.
Battery Source: is replaced with two 24-volt lead acid enclosed manifold type AN3150-2 or M318045-42.
Electrical System: is modified to accommodate the new installation.
Hydraulics: accommodate flap cylinder and flap travel changes, otherwise remains unchanged.
Center Of Gravity: remains the same as on the standard otter as does the weight and balance.
Firewall: remains in same position.
Oil System: as turbine engine is a wet sump unit. Does not require oil supply tank. Removed and replaced with new type oil cooler.
|
|
|
Dehavilland Turbo Otter DHC-3 STC - Click To Enlarge
Antarctic Expedition At South Pole
|
Airframe: some modifications to controls, flap travel changed.
Instruments: engine instruments only changed. Propeller and Ng tachometer torque meter and new 3-in-1-engine instrument installed.
Shawna Vaughan
Marketing Sales 360-671-7817
|